U.S. flag An official website of the United States government
Dot gov
Https

Accommodations

Filter Results

Clear

Clear

Clear

Monitor Arms

Monitor Arms are used to assist individuals who have dexterity limitations that prevent them from accomplishing essential job functions. They accomplish this by allowing an individual to position their monitor(s) at the most appropriate location, height, orientation, and angle based on their workstation setup and job requirements.
1-37 of 37 Results

22" Magic Arm Mounting Kit

22" Magic Arm Mounting Kit is a mounting arm. It can be attached to a desk or wheelchair with the included clamp and large center locking knob and can support objects up to 5 pounds. It comes with a triangle mounting plate that can help various switches. Reached 20.5” when fully extended
View Cart

32" Magic Arm Mounting Kit

The 32" Magic Arm Mounting Kit is a mounting arm that can be attached to a desk or wheelchair with the included clamp and large center locking knob. The Magic Arm Mounting Kit can support objects up to 5 pounds and comes with a triangle mounting plate that can help with various switches. The mounting arm can reach up to 230.5” when fully extended.
View Cart

7500-Wing Deluxe Dual Monitor Arm

The 7500-Wing Deluxe Dual Monitor Arm is an adjustable monitor arm that can support two monitors. This product will allow monitors to be independently rotated (360 degrees at three joints), and accommodates most monitors up to a 24" widescreen. It is VESA-monitor compatible and includes 75mm and 10mm adapters if needed. The monitor arm has an 18" vertical range and a 28" horizontal range and tilter mechanism that can tilt over 200 degrees. It also has an Internal cable management to conceal cables in the monitor arm. This product can be used in conjunction with an extender tube to raise the monitors 6", which will allow the user to view the monitors at an ergonomically correct position from both a seated and standing position. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.
VESA Mountable Adjustable
View Cart

EVO 5900 Single Articulating Monitor Arm

The EVO 5900 Single Articulating Monitor Arm is a monitor arm. It can be attached to a desk with the included clamp and grommet mounts and can support monitors up to 27 inches weighing between 1 and 12 pounds. This item allows a user to adjust the positioning of their monitor, with a maximum vertical range of 10.4 inches and a maximum horizontal range of 18 inches. The monitor may also be rotated for portrait or landscape viewing. Individuals who have dexterity limitations and require specific placement or adjustability of a single monitor to accomplish job tasks could benefit from this device.
Computer Use Only VESA Mountable
View Cart

EVO 5902 Dual Articulating Monitor Arm

The EVO 5902 Dual Articulating Monitor Arm is a monitor arm. It can be attached to a desk with the included clamp and grommet mounts and can support monitors up to 27 inches weighing between 1 and 15 pounds. This item allows a user to adjust the positioning of their monitors, with a maximum vertical range of 10.4 inches and a maximum horizontal range of 18 inches. The monitor may also be rotated for portrait or landscape viewing. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.
Computer Use Only VESA Mountable
View Cart

Extender Tube for 7500-Wing Deluxe Dual Monitor Arm

The Extender Tube for 7500-Wing Deluxe Dual Monitor Arm is a monitor arm accessory. This item is compatible with the 7500-Wing Deluxe Dual Monitor Arm and allows the user to add 6 inches of height to the monitor arm.
Adjustable
View Cart

Fellowes Professional Mounting Arm for Dual Flat Panel Display

The Fellowes Professional Mounting Arm is a monitor arm for individuals who use two monitors. It has 13 inches of height adjustability and 27 inches of reach. It has 75 degrees of tilt and 360 degrees of rotation. It can support LCD monitors up to 24 inches wide. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.
VESA Mountable
View Cart

Humanscale M10 Dual Monitor Arm with Crossbar, Handle, & Bolt-Thru Mount (Silver)

The Humanscale M10 Dual Monitor Arm is a monitor arm. The Humanscale M10 Dual Monitor Arm is built to hold heavier equipment; a strong triple crossbar allows M10 to hold up to three monitors or 48 pounds, all while maintaining a simple and sleek design. The Humanscale M10 Dual Monitor Arm has a crossbar for 2 monitors with a handle. The Humanscale M10 Dual Monitor Arm can be clamped to the desk edge or bolted through the desk. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.
View Cart

Humanscale M10 Dual Monitor Arm with Crossbar, Handle, & Two-Piece Clamp (Silver)

The Humanscale M10 Dual Monitor Arm with Crossbar is a monitor arm. The Humanscale M10 Dual Monitor Arm with Crossbar allows you to view your monitor(s) at an optimal position. The Humanscale M10 Dual Monitor Arm with Crossbar rubberized cable management makes it simple to run cords through a modular system for a clean, sleek and organized aesthetic. The Humanscale M10 Dual Monitor Arm with Crossbar product also has a built-in counterbalance indicator that provides the ability to counterbalance your monitor weight before monitor installation to reduce expensive computer setup costs. Crossbar with handle accommodates two monitors up to 48 lbs. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.
View Cart

Humanscale M10 Single Monitor Arm with Angled/Dynamic Links, Standard Tilt, Black VESA Cover, & Bolt-Thru Mount (Silver)

The Humanscale M10 Single Monitor Arm with Angled/Dynamic Links is a monitor arm. The Humanscale M10 Single Monitor Arm with Angled/Dynamic Links allows you to view the monitor at an optimal position to stop each joint anywhere along its rotation to prevent monitor or arm overhand on desk edges. The Humanscale M10 Single Monitor Arm with Angled/Dynamic Links is built to hold heavier equipment, a strong triple crossbar allows M10 to hold up to 48 pounds. The Humanscale M10 Single Monitor Arm with Angled/Dynamic Links monitor height it supports is 16" (full range of motion). Individuals who have dexterity limitations and require specific placement or adjustability of a single monitor to accomplish job tasks could benefit from this device.

View Cart

Humanscale M10 Single Monitor Arm with Angled/Dynamic Links, Standard Tilt, Black VESA Cover, & Two-Piece Clamp (Silver)

The Humanscale M10 Single Monitor Arm with Angled/Dynamic Links is a monitor arm. The Humanscale M10 Single Monitor Arm with Angled/Dynamic Links allows you to view the monitor at an optimal position. The Humanscale M10 Single Monitor Arm with Angled/Dynamic Links This has a patent-pending smart stop that allows you to customize the rotation of the arm, preventing overhang and protecting surrounding equipment. The Humanscale M10 Single Monitor Arm with Angled/Dynamic Links weighs 20 pounds. Individuals who have dexterity limitations may benefit from using this device to complete essential job functions.

View Cart

Humanscale M2.1 Single Monitor Arm with Bolt-Thru Mount (Silver)

The Humanscale M2.1 Single Monitor Arm with Bolt-Thru Mount is a monitor arm. The Humanscale M2.1 Single Monitor Arm with Bolt-Thru allows support and better working posture that creates more usable desktop space and helps maintain a clutter-free environment. The Humanscale M2.1 Single Monitor Arm with Bolt-Thru Mount has built-in counterbalance indicator that lets the installer counterbalance the monitor weight without a monitor. The Humanscale M2.1 Single Monitor Arm with Bolt-Thru Mount is for lighter monitors that weigh up to 15.5 lbs. The Humanscale M2.1 Single Monitor Arm with Bolt-Thru Mount height can be adjusted up to 10”. The Humanscale M2.1 Single Monitor Arm with Bolt-Thru Mount has a Standard Monitor Tilt (one per monitor) and black VESA plates with black plastic VESA covers. Individuals who have dexterity limitations may benefit from using this device to complete essential job functions.

View Cart

Humanscale M2.1 Single Monitor Arm with Two-Piece Clamp (Silver)

The Humanscale M2.1 Single Monitor Arm with Two-Piece Clamp is a monitor arm. The Humanscale M2.1 Single Monitor Arm with Two-Piece Clamp allows support and better working posture that creates more usable desktop space and helps maintain a clutter-free environment. The Humanscale M2.1 Single Monitor Arm with Two-Piece Clamp also has built-in counterbalance indicator that lets the installer counterbalance the monitor weight without a monitor. Humanscale M2.1 Single Monitor Arm with Two-Piece Clamp height can be adjusted up to 10”. The Humanscale M2.1 Single Monitor Arm with Two-Piece Clamp has a Standard Monitor Tilt (one per monitor). Individuals who have dexterity limitations may benefit from using this device to complete essential job functions.
View Cart

Humanscale M8.1 Dual Monitor Arm with Crossbar & Bolt-Thru Mount (Silver)

The Humanscale M8.1 Dual Monitor Arm with Crossbar & Bolt-Thru Mount (Silver) is a monitor arm. The Humanscale M8.1 Dual Monitor Arm with Crossbar & Bolt-Thru Mount (Silver) is fully compatible with traditional desks and sit/stand workstations. The Humanscale M8.1 Dual Monitor Arm with Crossbar & Bolt-Thru Mount (Silver) weighs from 6 to 28 pounds or with an optional crossbar support dual monitors up to 12 pounds each. The Humanscale M8.1 Dual Monitor Arm with Crossbar & Bolt-Thru Mount (Silver) dimensions are 6.5 x 8.2 x 12 inches. The Humanscale M8.1 Dual Monitor Arm with Crossbar & Bolt-Thru Mount (Silver) will allow you to view the monitors at an ergonomically correct position from both a seated and standing position. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.

View Cart

Humanscale M8.1 Dual Monitor Arm with Crossbar & Two-Piece Clamp (Silver)

The Humanscale M8.1 Dual Monitor Arm with Crossbar & Two-Piece Clamp (Silver) is a monitor arm. The Humanscale M8.1 Dual Monitor Arm with Crossbar & Two-Piece Clamp (Silver) accommodates two monitors up to 12 lbs. each and has a two-piece clamp mount base that accommodates up to 2.8″ thick work surface. The Humanscale M8.1 Dual Monitor Arm with Crossbar & Two-Piece Clamp (Silver) has a swivel stop adjustment at 90°, 180º, and 360º. The Humanscale M8.1 Dual Monitor Arm with Crossbar & Two-Piece Clamp (Silver) will allow you to view the monitors at an ergonomically correct position from both a seated and standing position. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.

View Cart

Humanscale M8.1 Dual Monitor Arm with Crossbar, Handle, & Bolt-Thru Mount (Silver)

The Humanscale M8.1 Dual Monitor Arm with Crossbar, Handle, & Bolt-Thru Mount (Silver) is a monitor arm. The Humanscale M8.1 Dual Monitor Arm with Crossbar, Handle, & Bolt-Thru Mount (Silver) allows support and better working posture that creates more usable desktop space and helps maintain a clutter-free environment. The Humanscale M8.1 Dual Monitor height can be adjusted up to 10”. The Humanscale M8.1 Dual Monitor weigh up to 15 lbs. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.

View Cart

Humanscale M8.1 Dual Monitor Arm with Crossbar, Handle, & Two-Piece Clamp (Silver)

The Humanscale M8.1 Dual Monitor Arm with Crossbar, Handle, & Two-Piece Clamp (Silver) is a monitor arm. The Humanscale M8.1 Dual Monitor Arm with Crossbar, Handle, & Two-Piece Clamp (Silver) accommodates two monitors up to 12 lbs. each and has a two-piece clamp mount base that accommodates up to 2.8″ thick work surface. The Humanscale M8.1 Dual Monitor Arm will allow you to view the monitors at an ergonomically correct position from both a seated and standing position. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.

View Cart

Humanscale M8.1 Single Monitor Arm with Bolt-Thru Mount (Silver)

The Humanscale M8.1 Single Monitor Arm with Bolt-Thru Mount is a monitor arm. The Humanscale M8.1 Single Monitor Arm with Bolt-Thru allows support and better working posture that creates more usable desktop space and helps maintain a clutter-free environment. The Humanscale M8.1 Single Monitor Arm with Bolt-Thru Mount has built-in counterbalance indicator that lets the installer counterbalance the monitor weight without a monitor. The Humanscale M8.1 Single Monitor Arm with Bolt-Thru Mount is for lighter monitors that weigh up to 15.5 lbs. The Humanscale M8.1 Single Monitor Arm with Bolt-Thru Mount height can be adjusted up to 10”. The Humanscale M8.1 Single Monitor Arm with Bolt-Thru Mount has a Standard Monitor Tilt (one per monitor) and black VESA plates with black plastic VESA covers. Individuals who have dexterity limitations may benefit from using this device to complete essential job functions.

View Cart

Humanscale M8.1 Single Monitor Arm with Two-Piece Clamp (Silver)

The Humanscale M8.1 Single Monitor Arm with Two-Piece Clamp is a monitor arm. The Humanscale M8.1 Single Monitor Arm with Two-Piece Clamp allows support and better working posture that creates more usable desktop space and helps maintain a clutter-free environment. The Humanscale M8.1 Single Monitor Arm with Two-Piece Clamp also has built-in counterbalance indicator that lets the installer counterbalance the monitor weight without a monitor. Humanscale M8.1 Single Monitor Arm with Two-Piece Clamp height can be adjusted up to 10”. The Humanscale M8.1 Single Monitor Arm with Two-Piece Clamp has a Standard Monitor Tilt (one per monitor). Individuals who have dexterity limitations may benefit from using this device to complete essential job functions.
View Cart

Innovative 7000-8408 Dual Monitor Arm (500)

The Innovative 7000-8408 Dual Monitor Arm (500) is a monitor arm. This monitor arm allows a user to mount and reposition two monitors up to 32 inches in screen size from one point on their desk. This desk mounted monitor arm can be clamped to the desk edge or bolted through the desk. Each monitor arm can be adjusted independently, with a 24 inch horizontal range per monitor arm and 8 inches of both up and down movement. Each monitor mechanism may be tilted over 200 degrees, and each monitor can be positioned in either landscape or portrait position. This monitor arm can support a range of 2 to 13 pounds per monitor. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.
VESA Mountable
View Cart

Innovative 7000-8408 Dual Monitor Arm (800)

The Innovative 7000-8408 Dual Monitor Arm (800) is a monitor arm. This monitor arm allows a user to mount and reposition two monitors up to 32 inches in screen size from one point on their desk. This desk mounted monitor arm can be clamped to the desk edge or bolted through the desk. Each monitor arm can be adjusted independently, with a 24 inch horizontal range per monitor arm and 8 inches of both up and down movement. Each monitor mechanism may be tilted over 200 degrees, and each monitor can be positioned in either landscape or portrait position. This monitor arm can support a range of 7.5 to 25 pounds per monitor. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.
VESA Mountable
View Cart

Innovative 7050 – Height-Adjustable Laptop + Monitor Mount 7050-800-500SR

The Innovative 7050 - Height-Adjustable Laptop + Monitor Mount (7050-800-500SR) is a monitor arm. This item allows the user to mount their laptop alongside a full-size monitor (up to 24”) for a dual screen setup. This monitor arm has a vertical range of 16 inches and can be clamped to the desk edge or bolted through. This version of the Innovative 7050 monitor arm will support a monitor from 7.5 to 25 pounds and a laptop from 3 to 13.5 pounds. Individuals who have dexterity limitations and require specific placement or adjustability of one monitor and a laptop to accomplish job tasks could benefit from this device.
VESA Mountable Adjustable
View Cart

Innovative Monitor Arm and Laptop Holder (7050-1000-500SR)

The Innovative Monitor Arm and Laptop Holder (7050-1000-500SR) is a monitor arm. This item allows the user to mount their laptop alongside a full-size monitor (up to 24”) for a dual screen setup. This monitor arm has a vertical range of 16 inches and can be clamped to the desk edge or bolted through. This version of the Innovative 7050 monitor arm will support a monitor from 12 to 31 pounds and a laptop from 3 to 13.5 pounds. Individuals who have dexterity limitations and require specific placement or adjustability of one monitor and a laptop to accomplish job tasks could benefit from this device.
VESA Mountable Adjustable
View Cart

Innovative Monitor Arm and Laptop Holder (7050-500-500SR)

The Innovative Monitor Arm and Laptop Holder (7050-500-500SR) is a monitor arm. This item allows the user to mount their laptop alongside a full-size monitor (up to 24”) for a dual screen setup. This monitor arm has a vertical range of 16 inches and can be clamped to the desk edge or bolted through. This version of the Innovative 7050 monitor arm will support a monitor from 2 to 13 pounds and a laptop from 3 to 13.5 pounds. Individuals who have dexterity limitations and require specific placement or adjustability of one monitor and a laptop to accomplish job tasks could benefit from this device.
VESA Mountable Adjustable
View Cart

Kontour K2W220S Dual Arm Wall Mount, Dual Monitor Array

The Kontour KCS220S Single Arm Wall Mount, Dual Monitor Array is a monitor arm for individuals who use two monitors. It has multiple mounting options and is VESA 75 x 75 mm and 100 x 100 mm. The maximum extension is 17.7" and the minimum depth is 2.95." Typical screen sizes for the Kontour K2W220S Dual Arm Wall Mount, Dual Monitor Array are 10-30" with +/- 15-degree tilt and has a weight capacity of up to 25 pounds per monitor. This monitor arm is available in black and silver. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.   
VESA Mountable Adjustable
View Cart

Kontour KCS220S Single Arm Desk Mount, Dual Monitor Array

The Kontour KCS220S Single Arm Desk Mount, Dual Monitor Array is a monitor arm for individuals who use two monitors. It has multiple mounting options and is VESA 75 x 75 mm and 100 x 100 mm compliant (interface brackets available for non-VESA compliant displays). The mounting surface maximum thickness is 3.2" while the grommet hole size is 0.38"- 3." The maximum extension is 14.7" and minimum depth is 6.4." Typical screen sizes for the Kontour K2W220S Dual Arm Wall Mount, Dual Monitor Array are 10-24" with +/- 15 degree tilt and has a weight capacity of up to 17 pounds per monitor. This monitor arm is available in black. Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.
VESA Mountable Adjustable
View Cart

SAA7000 Articulating Monitor Arm

The SAA7000 Articulating Monitor Arm is a monitor arm for individuals who are using one monitor. This arm can reach out 23" and can fold up into 3.2". It can support a monitor weighing between 5 and 28 lb. The SAA7000 Articulating Monitor Arm allows for over 15.5" of vertical travel and can attach to tables and desks up to 2.5" thick. In addition, this item's clamps are VESA compliant. This arm will allow the user to move the screen anywhere in an area 16" high, 20" deep, and 38" wide. Also, if you are interested in tips for installing this monitor arm or how to best adjust it, please check out the manufacturer's instructional video - https://www.youtube.com/watch?v=v7ogzAkbjQc&feature=youtu.be. Individuals who experience dexterity limitations and need to control the location of their monitor in the course of their duties may benefit from this item. 
VESA Mountable Adjustable
View Cart

SIIG Premium Aluminum Triple Monitor Stand

SIIG Triple Monitor Desk Stand – 13" to 27" enables you to mount three monitors side-by-side t create an ergonomic working environment. The aluminum mounting arms are built support three monitors from 13" to 27" with weight up to 17.6 lbs each. Mounting bracket with detachable VESA plate is designed to simplify the installation procedure and makes mounting the monitor to your desirable position quick and simple to manage. Hinges are integrated to allow the side monitors to be curved-in for maximum viewing comfort. Heavy duty counter-balanced base ensures stability and allows easy re-positioning around the desktop.
View Cart

Workrite CONF-2SDA-BSE-CCG-S Dual Articulating Arm with C-Clamp/Grommet Base

The Workrite CONF-2SDA-BSE-CCG-S Dual Articulating Arm with C-Clamp/Grommet Base is a dual monitor arm. The dual monitor arm allows for the user to align the two monitors in a way in which the user can seamlessly utilize both monitors. The monitor arms allow for 13 inches of vertical movement and 22.5 inches of forward reach. This includes both c-clamp & grommet mounting options. Individuals with dexterity related limitations may benefit from using this device.
View Cart

Workrite Conform 14" Pole w/ C-Clamp & Grommet Base (CONF-PB-14CCG-S)

The Workrite Conform 14"" Pole w/ C-Clamp & Grommet Base (CONF-PB-14CCG-S)Conform 14"" pole, heavy duty C-clamp & Grommet Base is for use with a static monitor arm or articulating arms with pole mount adapter. Designed for robust applications. For use with Static or articulating arms with a pole mount adapter.
View Cart

Workrite Conform Dual Monitor Arm (Silver, Clamp & Grommet)

The Conform Dual Articulating Monitor Arm is a monitor arm. This product aligns two monitors side-by-side on a single base while maintaining independent movement and articulation. It supports two monitors 5–17 lb. each. The maximum monitor height:is 19.5" (full range of motion). It uses a pin assembly system which allows the Conform Dual to be decoupled for independent use should your needs change. Mount the arm to a variety of bases, add additional arms or reconfigure as needs change. Articulation range is 13", Forward reach: 15.375", Stowed depth: 5.5", Monitor Tilt: +90°/-45° Pivot: +/-90°, Rotation: +/-90°. Supports standard VESA (75 mm & 100 mm). Individuals who have dexterity limitations and require specific placement or adjustability of two monitors to accomplish job tasks could benefit from this device.
Adjustable
View Cart

Workrite Conform Dual Pole Mount Adaptor: CONF-ADPT-DPM-S

The Workrite Conform Dual Pole Mount Adaptor: CONF-ADPT-DPM-S for use with Conform Articulating or Static Monitor Arms Mount 2 Articulating Arms or Static Arms to a pole mount Supports up to 48 lbs
View Cart

Workrite Conform Heavy Duty Articulating Arm (Graphite, C-Clamp)

The Conform Heavy-Duty Articulating Monitor Arm is a monitor arm. This device is engineered to support heavier all-in-one computer monitors and VESA mounted CPU/monitor combinations, the Conform Heavy Duty lifts up to 40 lbs with ease. The Conform Heavy Duty can be used with any Conform Base or configured to work side by side any other Conform Monitor Arm. Smooth lifting, maintenance-free gas spring supports one 17-40 lb. monitor. Please note: monitors that weigh below 17 lbs may be unable to apply adequate pressure to the gas spring, making it difficult or unable to adjust height.  Adjust to the height, with 14 inches of vertical movement. Extends to 22.5 inches of forward reach, for monitor viewing. Quickly folds down to 5.25 inches, freeing up user workspace. Individuals with dexterity limitations may benefit from this device in completing essential job functions. 
Adjustable
View Cart

Workrite Conform Heavy Duty Articulating Arm (Graphite, Grommet)

The Conform Heavy-Duty Articulating Monitor Arm is a monitor arm. This device is engineered to support heavier all-in-one computer monitors and VESA mounted CPU/monitor combinations, the Conform Heavy Duty lifts up to 40 lbs with ease. The Conform Heavy Duty can be used with any Conform Base or configured to work side by side any other Conform Monitor Arm. Smooth lifting, maintenance-free gas spring supports one 17-40 lb. monitor. Please note: monitors that weigh below 17 lbs may be unable to apply adequate pressure to the gas spring, making it difficult or unable to adjust height.  Adjust to the perfect height, with 14 inches of vertical movement. Extends to 22.5 inches of forward reach, for monitor viewing. Quickly folds down to 5.25 inches, freeing up user workspace. Easily route and conceal cables through the integrated wire managers. Interchangeable pin system ensures future adaptability. Discrete silver color blends into office environments.  Individuals with dexterity limitations may benefit from this device in completing essential job functions. 
Adjustable
View Cart

Workrite Conform Heavy Duty Articulating Arm (Silver, C-Clamp)

The Conform Heavy-Duty Articulating Monitor Arm is a monitor arm. This device is engineered to support heavier all-in-one computer monitors and VESA mounted CPU/monitor combinations, the Conform Heavy Duty lifts up to 40 lbs with ease. The Conform Heavy Duty can be used with any Conform Base or configured to work side by side any other Conform Monitor Arm. Smooth lifting, maintenance-free gas spring supports one 17-40 lb. monitor. Please note: monitors that weigh below 17 lbs may be unable to apply adequate pressure to the gas spring, making it difficult or unable to adjust height.  Adjust theheight, with 14 inches of vertical movement. Extends to 22.5 inches of forward reach, for monitor viewing. Quickly folds down to 5.25 inches, freeing up user workspace. Individuals who have dexterity limitations may benefit from using this device to complete essential job functions. 
Adjustable
View Cart

Workrite Conform Heavy Duty Articulating Arm (Silver, Grommet)

The Conform Heavy-Duty Articulating Monitor Arm is a monitor arm. This device is engineered to support heavier all-in-one computer monitors and VESA mounted CPU/monitor combinations, the Conform Heavy Duty lifts up to 40 lbs with ease. The Conform Heavy Duty can be used with any Conform Base or configured to work side by side any other Conform Monitor Arm. Smooth lifting, maintenance-free gas spring supports one 17-40 lb. monitor. Please note: monitors that weigh below 17 lbs may be unable to apply adequate pressure to the gas spring, making it difficult or unable to adjust height.  Adjust theheight, with 14 inches of vertical movement. Extends to 22.5 inches of forward reach, for monitor viewing. Quickly folds down to 5.25 inches, freeing up user workspace. Individuals who have dexterity limitations may benefit from using this device to complete essential job functions. 
Adjustable
View Cart

Workrite Conform Single Monitor Arm (Silver, Clamp & Grommet)

The Conform Single Articulating Monitor Arm is a monitor arm. This monitor arm mounts a monitor on a single base while maintaining independent movement and articulation. It supports one 5–17 lb. monitor. The maximum monitor height it supports is 16" (full range of motion). It uses a pin assembly system. Its articulation range is 13", Forward reach: 22.5", Stowed depth: 5.25", Monitor Tilt: +90°/-45° Pivot: +/-90°, Rotation: +/-90°. Supports Standard VESA mounting systems (75 mm & 100 mm). Individuals who have dexterity limitations and require specific placement or adjustability of a single monitor to accomplish job tasks could benefit from this device.
Adjustable
View Cart